source: trunk/doc/doxygen.config.in @ 1814

Last change on this file since 1814 was 1814, checked in by Peter, 12 years ago

Finalized dox for qQuantileNormalizer. Closes #478

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 36.9 KB
Line 
1# @configure_input@
2# $Id: doxygen.config.in 1814 2009-02-20 22:28:18Z peter $
3
4# Copyright (C) 2003, 2004 Jari Häkkinen
5# Copyright (C) 2005 Peter Johansson
6# Copyright (C) 2006, 2007 Jari Häkkinen, Peter Johansson
7# Copyright (C) 2008 Jari Häkkinen, Peter Johansson, Markus Ringnér
8# Copyright (C) 2009 Peter Johansson
9#
10# This file is part of the yat library, http://dev.thep.lu.se/yat
11#
12# The yat library is free software; you can redistribute it
13# and/or modify it under the terms of the GNU General Public License as
14# published by the Free Software Foundation; either version 3 of the
15# License, or (at your option) any later version.
16#
17# The yat library is distributed in the hope that it will be useful,
18# but WITHOUT ANY WARRANTY; without even the implied warranty of
19# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
20# General Public License for more details.
21#
22# You should have received a copy of the GNU General Public License
23# along with yat. If not, see <http://www.gnu.org/licenses/>.
24#
25
26# Doxyfile 1.2.13.1
27
28# This file describes the settings to be used by the documentation system
29# doxygen (www.doxygen.org) for a project
30#
31# All text after a hash (#) is considered a comment and will be ignored
32# The format is:
33#       TAG = value [value, ...]
34# For lists items can also be appended using:
35#       TAG += value [value, ...]
36# Values that contain spaces should be placed between quotes (" ")
37
38#---------------------------------------------------------------------------
39# General configuration options
40#---------------------------------------------------------------------------
41
42# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
43# by quotes) that should identify the project.
44
45PROJECT_NAME           = "@PACKAGE@"
46
47# The PROJECT_NUMBER tag can be used to enter a project or revision number.
48# This could be handy for archiving the generated documentation or
49# if some version control system is used.
50
51PROJECT_NUMBER         = @PACKAGE_VERSION@
52
53# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
54# base path where the generated documentation will be put.
55# If a relative path is entered, it will be relative to the location
56# where doxygen was started. If left blank the current directory will be used.
57
58OUTPUT_DIRECTORY       = .
59
60# The OUTPUT_LANGUAGE tag is used to specify the language in which all
61# documentation generated by doxygen is written. Doxygen will use this
62# information to generate all constant output in the proper language.
63# The default language is English, other supported languages are:
64# Brazilian, Chinese, Croatian, Czech, Danish, Dutch, Finnish, French,
65# German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish,
66# Portuguese, Romanian, Russian, Slovak, Slovene, Spanish and Swedish.
67
68OUTPUT_LANGUAGE        = English
69
70# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
71# documentation are documented, even if no documentation was available.
72# Private class members and static file members will be hidden unless
73# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
74
75EXTRACT_ALL            = NO
76
77# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
78# will be included in the documentation.
79
80EXTRACT_PRIVATE        = NO
81
82# If the EXTRACT_STATIC tag is set to YES all static members of a file
83# will be included in the documentation.
84
85EXTRACT_STATIC         = NO
86
87# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
88# defined locally in source files will be included in the documentation.
89# If set to NO only classes defined in header files are included.
90
91EXTRACT_LOCAL_CLASSES  = YES
92
93# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
94# undocumented members of documented classes, files or namespaces.
95# If set to NO (the default) these members will be included in the
96# various overviews, but no documentation section is generated.
97# This option has no effect if EXTRACT_ALL is enabled.
98
99HIDE_UNDOC_MEMBERS     = NO
100
101# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
102# undocumented classes that are normally visible in the class hierarchy.
103# If set to NO (the default) these class will be included in the various
104# overviews. This option has no effect if EXTRACT_ALL is enabled.
105
106HIDE_UNDOC_CLASSES     = NO
107
108# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
109# include brief member descriptions after the members that are listed in
110# the file and class documentation (similar to JavaDoc).
111# Set to NO to disable this.
112
113BRIEF_MEMBER_DESC      = YES
114
115# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
116# the brief description of a member or function before the detailed description.
117# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
118# brief descriptions will be completely suppressed.
119
120REPEAT_BRIEF           = YES
121
122# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
123# Doxygen will generate a detailed section even if there is only a brief
124# description.
125
126ALWAYS_DETAILED_SEC    = NO
127
128# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
129# members of a class in the documentation of that class as if those members were
130# ordinary class members. Constructors, destructors and assignment operators of
131# the base classes will not be shown.
132
133INLINE_INHERITED_MEMB  = YES
134
135# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
136# path before files name in the file list and in the header files. If set
137# to NO the shortest path that makes the file name unique will be used.
138
139FULL_PATH_NAMES        = YES
140
141# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
142# can be used to strip a user defined part of the path. Stripping is
143# only done if one of the specified strings matches the left-hand part of
144# the path. It is allowed to use relative paths in the argument list.
145
146STRIP_FROM_PATH        = @top_srcdir@
147
148# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
149# the path mentioned in the documentation of a class, which tells
150# the reader which header file to include in order to use a class.
151# If left blank only the name of the header file containing the class
152# definition is used. Otherwise one should specify the include paths that
153# are normally passed to the compiler using the -I flag.
154
155STRIP_FROM_INC_PATH    = @top_srcdir@
156
157# The INTERNAL_DOCS tag determines if documentation
158# that is typed after a \internal command is included. If the tag is set
159# to NO (the default) then the documentation will be excluded.
160# Set it to YES to include the internal documentation.
161
162INTERNAL_DOCS          = YES
163
164# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
165# doxygen to hide any special comment blocks from generated source code
166# fragments. Normal C and C++ comments will always remain visible.
167
168STRIP_CODE_COMMENTS    = YES
169
170# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
171# file names in lower case letters. If set to YES upper case letters are also
172# allowed. This is useful if you have classes or files whose names only differ
173# in case and if your file system supports case sensitive file names. Windows
174# users are adviced to set this option to NO.
175
176CASE_SENSE_NAMES       = YES
177
178# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
179# (but less readable) file names. This can be useful is your file systems
180# doesn't support long names like on DOS, Mac, or CD-ROM.
181
182SHORT_NAMES            = NO
183
184# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
185# will show members with their full class and namespace scopes in the
186# documentation. If set to YES the scope will be hidden.
187
188HIDE_SCOPE_NAMES       = NO
189
190# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
191# will generate a verbatim copy of the header file for each class for
192# which an include is specified. Set to NO to disable this.
193
194VERBATIM_HEADERS       = YES
195
196# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
197# will put list of the files that are included by a file in the documentation
198# of that file.
199
200SHOW_INCLUDE_FILES     = YES
201
202# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
203# will interpret the first line (until the first dot) of a JavaDoc-style
204# comment as the brief description. If set to NO, the JavaDoc
205# comments  will behave just like the Qt-style comments (thus requiring an
206# explict @brief command for a brief description.
207
208JAVADOC_AUTOBRIEF      = NO
209
210# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
211# member inherits the documentation from any documented member that it
212# reimplements.
213
214INHERIT_DOCS           = YES
215
216# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
217# is inserted in the documentation for inline members.
218
219INLINE_INFO            = YES
220
221# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
222# will sort the (detailed) documentation of file and class members
223# alphabetically by member name. If set to NO the members will appear in
224# declaration order.
225
226SORT_MEMBER_DOCS       = YES
227
228# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
229# sorted by fully-qualified names, including namespaces. If set to
230# NO (the default), the class list will be sorted only by class name,
231# not including the namespace part.
232# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
233# Note: This option applies only to the class list, not to the
234# alphabetical list.
235
236SORT_BY_SCOPE_NAME     = YES
237
238# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
239# tag is set to YES, then doxygen will reuse the documentation of the first
240# member in the group (if any) for the other members of the group. By default
241# all members of a group must be documented explicitly.
242
243DISTRIBUTE_GROUP_DOC   = YES
244
245# The TAB_SIZE tag can be used to set the number of spaces in a tab.
246# Doxygen uses this value to replace tabs by spaces in code fragments.
247
248TAB_SIZE               = 2
249
250# The GENERATE_TODOLIST tag can be used to enable (YES) or
251# disable (NO) the todo list. This list is created by putting \todo
252# commands in the documentation.
253
254GENERATE_TODOLIST      = NO
255
256# The GENERATE_TESTLIST tag can be used to enable (YES) or
257# disable (NO) the test list. This list is created by putting \test
258# commands in the documentation.
259
260GENERATE_TESTLIST      = NO
261
262# The GENERATE_BUGLIST tag can be used to enable (YES) or
263# disable (NO) the bug list. This list is created by putting \bug
264# commands in the documentation.
265
266GENERATE_BUGLIST       = NO
267
268# This tag can be used to specify a number of aliases that acts
269# as commands in the documentation. An alias has the form "name=value".
270# For example adding "sideeffect=\par Side Effects:\n" will allow you to
271# put the command \sideeffect (or @sideeffect) in the documentation, which
272# will result in a user defined paragraph with heading "Side Effects:".
273# You can put \n's in the value part of an alias to insert newlines.
274
275ALIASES = "trivial_iterator=<a href=\"http://www.sgi.com/tech/stl/TrivialIterator.html\">Trivial Iterator</a>"
276ALIASES += "input_iterator=<a href=\"http://www.sgi.com/tech/stl/InputIterator.html\">Input Iterator</a>"
277ALIASES += "output_iterator=<a href=\"http://www.sgi.com/tech/stl/OutputIterator.html\">Output Iterator</a>"
278ALIASES += "forward_iterator=<a href=\"http://www.sgi.com/tech/stl/ForwardIterator.html\">Forward Iterator</a>"
279ALIASES += "bidirectional_iterator=<a href=\"http://www.sgi.com/tech/stl/BidirectionalIterator.html\">Bidirectional Iterator</a>"
280ALIASES += "random_access_iterator=<a href=\"http://www.sgi.com/tech/stl/RandomAccessIterator.html\">Random Access Iterator</a>"
281
282# The ENABLED_SECTIONS tag can be used to enable conditional
283# documentation sections, marked by \if sectionname ... \endif.
284
285ENABLED_SECTIONS       =
286
287# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
288# the initial value of a variable or define consist of for it to appear in
289# the documentation. If the initializer consists of more lines than specified
290# here it will be hidden. Use a value of 0 to hide initializers completely.
291# The appearance of the initializer of individual variables and defines in the
292# documentation can be controlled using \showinitializer or \hideinitializer
293# command in the documentation regardless of this setting.
294
295MAX_INITIALIZER_LINES  = 30
296
297# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
298# only. Doxygen will then generate output that is more tailored for C.
299# For instance some of the names that are used will be different. The list
300# of all members will be omitted, etc.
301
302OPTIMIZE_OUTPUT_FOR_C  = NO
303
304# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
305# at the bottom of the documentation of classes and structs. If set to YES the
306# list will mention the files that were used to generate the documentation.
307
308SHOW_USED_FILES        = YES
309
310#---------------------------------------------------------------------------
311# configuration options related to warning and progress messages
312#---------------------------------------------------------------------------
313
314# The QUIET tag can be used to turn on/off the messages that are generated
315# by doxygen. Possible values are YES and NO. If left blank NO is used.
316
317QUIET                  = NO
318
319# The WARNINGS tag can be used to turn on/off the warning messages that are
320# generated by doxygen. Possible values are YES and NO. If left blank
321# NO is used.
322
323WARNINGS               = YES
324
325# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
326# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
327# automatically be disabled.
328
329WARN_IF_UNDOCUMENTED   = YES
330
331# The WARN_FORMAT tag determines the format of the warning messages that
332# doxygen can produce. The string should contain the $file, $line, and $text
333# tags, which will be replaced by the file and line number from which the
334# warning originated and the warning text.
335
336WARN_FORMAT            =
337
338# The WARN_LOGFILE tag can be used to specify a file to which warning
339# and error messages should be written. If left blank the output is written
340# to stderr.
341
342WARN_LOGFILE           = doxygen.error
343
344#---------------------------------------------------------------------------
345# configuration options related to the input files
346#---------------------------------------------------------------------------
347
348# The INPUT tag can be used to specify the files and/or directories that contain
349# documented source files. You may enter file names like "myfile.cpp" or
350# directories like "/usr/src/myproject". Separate the files or directories
351# with spaces.
352
353INPUT                  = @srcdir@/build_tool.doxygen @builddir@/first_page.doxygen @srcdir@/namespaces.doxygen @srcdir@/concepts.doxygen @srcdir@/Statistics.doxygen @top_srcdir@/yat @top_builddir@/yat
354
355# If the value of the INPUT tag contains directories, you can use the
356# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
357# and *.h) to filter out the source-files in the directories. If left
358# blank the following patterns are tested:
359# *.c *.cc *.cxx *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
360# *.h++ *.idl
361
362FILE_PATTERNS          = *.h
363
364# The RECURSIVE tag can be used to turn specify whether or not subdirectories
365# should be searched for input files as well. Possible values are YES and NO.
366# If left blank NO is used.
367
368RECURSIVE              = YES
369
370# The EXCLUDE tag can be used to specify files and/or directories that should
371# excluded from the INPUT source files. This way you can easily exclude a
372# subdirectory from a directory tree whose root is specified with the INPUT tag.
373
374EXCLUDE                =
375
376# If the value of the INPUT tag contains directories, you can use the
377# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
378# certain files from those directories.
379
380EXCLUDE_PATTERNS       = .svn .deps .libs .svndigest
381
382# The EXAMPLE_PATH tag can be used to specify one or more files or
383# directories that contain example code fragments that are included (see
384# the \include command).
385
386EXAMPLE_PATH           =
387
388# If the value of the EXAMPLE_PATH tag contains directories, you can use the
389# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
390# and *.h) to filter out the source-files in the directories. If left
391# blank all files are included.
392
393EXAMPLE_PATTERNS       =
394
395# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
396# searched for input files to be used with the \include or \dontinclude
397# commands irrespective of the value of the RECURSIVE tag.
398# Possible values are YES and NO. If left blank NO is used.
399
400EXAMPLE_RECURSIVE      = NO
401
402# The IMAGE_PATH tag can be used to specify one or more files or
403# directories that contain image that are included in the documentation (see
404# the \image command).
405
406IMAGE_PATH             =
407
408# The INPUT_FILTER tag can be used to specify a program that doxygen should
409# invoke to filter for each input file. Doxygen will invoke the filter program
410# by executing (via popen()) the command <filter> <input-file>, where <filter>
411# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
412# input file. Doxygen will then use the output that the filter program writes
413# to standard output.
414
415INPUT_FILTER           =
416
417# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
418# INPUT_FILTER) will be used to filter the input files when producing source
419# files to browse.
420
421FILTER_SOURCE_FILES    = NO
422
423#---------------------------------------------------------------------------
424# configuration options related to source browsing
425#---------------------------------------------------------------------------
426
427# If the SOURCE_BROWSER tag is set to YES then a list of source files will
428# be generated. Documented entities will be cross-referenced with these sources.
429
430SOURCE_BROWSER         = NO
431
432# Setting the INLINE_SOURCES tag to YES will include the body
433# of functions and classes directly in the documentation.
434
435INLINE_SOURCES         = NO
436
437# If the REFERENCED_BY_RELATION tag is set to YES (the default)
438# then for each documented function all documented
439# functions referencing it will be listed.
440
441REFERENCED_BY_RELATION = NO
442
443# If the REFERENCES_RELATION tag is set to YES (the default)
444# then for each documented function all documented entities
445# called/used by that function will be listed.
446
447REFERENCES_RELATION    = NO
448
449#---------------------------------------------------------------------------
450# configuration options related to the alphabetical class index
451#---------------------------------------------------------------------------
452
453# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
454# of all compounds will be generated. Enable this if the project
455# contains a lot of classes, structs, unions or interfaces.
456
457ALPHABETICAL_INDEX     = YES
458
459# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
460# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
461# in which this list will be split (can be a number in the range [1..20])
462
463COLS_IN_ALPHA_INDEX    = 5
464
465# In case all classes in a project start with a common prefix, all
466# classes will be put under the same header in the alphabetical index.
467# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
468# should be ignored while generating the index headers.
469
470IGNORE_PREFIX          =
471
472#---------------------------------------------------------------------------
473# configuration options related to the HTML output
474#---------------------------------------------------------------------------
475
476# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
477# generate HTML output.
478
479GENERATE_HTML          = NO
480
481# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
482# If a relative path is entered the value of OUTPUT_DIRECTORY will be
483# put in front of it. If left blank `html' will be used as the default path.
484
485HTML_OUTPUT            = @DX_HTML_OUTPUT@
486
487# The HTML_HEADER tag can be used to specify a personal HTML header for
488# each generated HTML page. If it is left blank doxygen will generate a
489# standard header.
490
491HTML_HEADER            =
492
493# The HTML_FOOTER tag can be used to specify a personal HTML footer for
494# each generated HTML page. If it is left blank doxygen will generate a
495# standard footer.
496
497HTML_FOOTER            =
498
499# The HTML_STYLESHEET tag can be used to specify a user defined cascading
500# style sheet that is used by each HTML page. It can be used to
501# fine-tune the look of the HTML output. If the tag is left blank doxygen
502# will generate a default style sheet
503
504HTML_STYLESHEET        =
505
506# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
507# files or namespaces will be aligned in HTML using tables. If set to
508# NO a bullet list will be used.
509
510HTML_ALIGN_MEMBERS     = YES
511
512# If the GENERATE_HTMLHELP tag is set to YES, additional index files
513# will be generated that can be used as input for tools like the
514# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
515# of the generated HTML documentation.
516
517GENERATE_HTMLHELP      = NO
518
519# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
520# controls if a separate .chi index file is generated (YES) or that
521# it should be included in the master .chm file (NO).
522
523GENERATE_CHI           = NO
524
525# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
526# controls whether a binary table of contents is generated (YES) or a
527# normal table of contents (NO) in the .chm file.
528
529BINARY_TOC             = NO
530
531# The TOC_EXPAND flag can be set to YES to add extra items for group members
532# to the contents of the Html help documentation and to the tree view.
533
534TOC_EXPAND             = NO
535
536# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
537# top of each HTML page. The value NO (the default) enables the index and
538# the value YES disables it.
539
540DISABLE_INDEX          = NO
541
542# This tag can be used to set the number of enum values (range [1..20])
543# that doxygen will group on one line in the generated HTML documentation.
544
545ENUM_VALUES_PER_LINE   = 4
546
547# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
548# generated containing a tree-like index structure (just like the one that
549# is generated for HTML Help). For this to work a browser that supports
550# JavaScript and frames is required (for instance Mozilla, Netscape 4.0+,
551# or Internet explorer 4.0+). Note that for large projects the tree generation
552# can take a very long time. In such cases it is better to disable this feature.
553# Windows users are probably better off using the HTML help feature.
554
555GENERATE_TREEVIEW      = NO
556
557# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
558# used to set the initial width (in pixels) of the frame in which the tree
559# is shown.
560
561TREEVIEW_WIDTH         = 250
562
563#---------------------------------------------------------------------------
564# configuration options related to the LaTeX output
565#---------------------------------------------------------------------------
566
567# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
568# generate Latex output.
569
570GENERATE_LATEX         = NO
571
572# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
573# If a relative path is entered the value of OUTPUT_DIRECTORY will be
574# put in front of it. If left blank `latex' will be used as the default path.
575
576LATEX_OUTPUT           = @DX_LATEX_OUTPUT@
577
578# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
579# LaTeX documents. This may be useful for small projects and may help to
580# save some trees in general.
581
582COMPACT_LATEX          = NO
583
584# The PAPER_TYPE tag can be used to set the paper type that is used
585# by the printer. Possible values are: a4, a4wide, letter, legal and
586# executive. If left blank a4wide will be used.
587
588PAPER_TYPE             = a4wide
589
590# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
591# packages that should be included in the LaTeX output.
592
593EXTRA_PACKAGES         =
594
595# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
596# the generated latex document. The header should contain everything until
597# the first chapter. If it is left blank doxygen will generate a
598# standard header. Notice: only use this tag if you know what you are doing!
599
600LATEX_HEADER           =
601
602# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
603# is prepared for conversion to pdf (using ps2pdf). The pdf file will
604# contain links (just like the HTML output) instead of page references
605# This makes the output suitable for online browsing using a pdf viewer.
606
607PDF_HYPERLINKS         = YES
608
609# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
610# plain latex in the generated Makefile. Set this option to YES to get a
611# higher quality PDF documentation.
612
613USE_PDFLATEX           = YES
614
615# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
616# command to the generated LaTeX files. This will instruct LaTeX to keep
617# running if errors occur, instead of asking the user for help.
618# This option is also used when generating formulas in HTML.
619
620LATEX_BATCHMODE        = NO
621
622#---------------------------------------------------------------------------
623# configuration options related to the RTF output
624#---------------------------------------------------------------------------
625
626# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
627# The RTF output is optimised for Word 97 and may not look very pretty with
628# other RTF readers or editors.
629
630GENERATE_RTF           = NO
631
632# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
633# If a relative path is entered the value of OUTPUT_DIRECTORY will be
634# put in front of it. If left blank `rtf' will be used as the default path.
635
636RTF_OUTPUT             =
637
638# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
639# RTF documents. This may be useful for small projects and may help to
640# save some trees in general.
641
642COMPACT_RTF            = NO
643
644# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
645# will contain hyperlink fields. The RTF file will
646# contain links (just like the HTML output) instead of page references.
647# This makes the output suitable for online browsing using WORD or other
648# programs which support those fields.
649# Note: wordpad (write) and others do not support links.
650
651RTF_HYPERLINKS         = NO
652
653# Load stylesheet definitions from file. Syntax is similar to doxygen's
654# config file, i.e. a series of assigments. You only have to provide
655# replacements, missing definitions are set to their default value.
656
657RTF_STYLESHEET_FILE    =
658
659# Set optional variables used in the generation of an rtf document.
660# Syntax is similar to doxygen's config file.
661
662RTF_EXTENSIONS_FILE    =
663
664#---------------------------------------------------------------------------
665# configuration options related to the man page output
666#---------------------------------------------------------------------------
667
668# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
669# generate man pages
670
671GENERATE_MAN           = NO
672
673# The MAN_OUTPUT tag is used to specify where the man pages will be put.
674# If a relative path is entered the value of OUTPUT_DIRECTORY will be
675# put in front of it. If left blank `man' will be used as the default path.
676
677MAN_OUTPUT             =
678
679# The MAN_EXTENSION tag determines the extension that is added to
680# the generated man pages (default is the subroutine's section .3)
681
682MAN_EXTENSION          =
683
684# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
685# then it will generate one additional man file for each entity
686# documented in the real man page(s). These additional files
687# only source the real man page, but without them the man command
688# would be unable to find the correct page. The default is NO.
689
690MAN_LINKS              = NO
691
692#---------------------------------------------------------------------------
693# configuration options related to the XML output
694#---------------------------------------------------------------------------
695
696# If the GENERATE_XML tag is set to YES Doxygen will
697# generate an XML file that captures the structure of
698# the code including all documentation. Note that this
699# feature is still experimental and incomplete at the
700# moment.
701
702GENERATE_XML           = NO
703
704#---------------------------------------------------------------------------
705# configuration options for the AutoGen Definitions output
706#---------------------------------------------------------------------------
707
708# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
709# generate an AutoGen Definitions (see autogen.sf.net) file
710# that captures the structure of the code including all
711# documentation. Note that this feature is still experimental
712# and incomplete at the moment.
713
714GENERATE_AUTOGEN_DEF   = NO
715
716#---------------------------------------------------------------------------
717# Configuration options related to the preprocessor   
718#---------------------------------------------------------------------------
719
720# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
721# evaluate all C-preprocessor directives found in the sources and include
722# files.
723
724ENABLE_PREPROCESSING   = YES
725
726# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
727# names in the source code. If set to NO (the default) only conditional
728# compilation will be performed. Macro expansion can be done in a controlled
729# way by setting EXPAND_ONLY_PREDEF to YES.
730
731MACRO_EXPANSION        = NO
732
733# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
734# then the macro expansion is limited to the macros specified with the
735# PREDEFINED and EXPAND_AS_PREDEFINED tags.
736
737EXPAND_ONLY_PREDEF     = NO
738
739# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
740# in the INCLUDE_PATH (see below) will be search if a #include is found.
741
742SEARCH_INCLUDES        = YES
743
744# The INCLUDE_PATH tag can be used to specify one or more directories that
745# contain include files that are not input files but should be processed by
746# the preprocessor.
747
748INCLUDE_PATH           =
749
750# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
751# patterns (like *.h and *.hpp) to filter out the header-files in the
752# directories. If left blank, the patterns specified with FILE_PATTERNS will
753# be used.
754
755INCLUDE_FILE_PATTERNS  =
756
757# The PREDEFINED tag can be used to specify one or more macro names that
758# are defined before the preprocessor is started (similar to the -D option of
759# gcc). The argument of the tag is a list of macros of the form: name
760# or name=definition (no spaces). If the definition and the = are
761# omitted =1 is assumed.
762
763PREDEFINED             =
764
765# If the MACRO_EXPANSION and EXPAND_PREDEF_ONLY tags are set to YES then
766# this tag can be used to specify a list of macro names that should be expanded.
767# The macro definition that is found in the sources will be used.
768# Use the PREDEFINED tag if you want to use a different macro definition.
769
770EXPAND_AS_DEFINED      =
771
772# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
773# doxygen's preprocessor will remove all function-like macros that are alone
774# on a line and do not end with a semicolon. Such function macros are typically
775# used for boiler-plate code, and will confuse the parser if not removed.
776
777SKIP_FUNCTION_MACROS   = YES
778
779#---------------------------------------------------------------------------
780# Configuration::addtions related to external references   
781#---------------------------------------------------------------------------
782
783# The TAGFILES tag can be used to specify one or more tagfiles.
784
785TAGFILES               =
786
787# When a file name is specified after GENERATE_TAGFILE, doxygen will create
788# a tag file that is based on the input files it reads.
789
790GENERATE_TAGFILE       =
791
792# If the ALLEXTERNALS tag is set to YES all external classes will be listed
793# in the class index. If set to NO only the inherited external classes
794# will be listed.
795
796ALLEXTERNALS           = NO
797
798# The PERL_PATH should be the absolute path and name of the perl script
799# interpreter (i.e. the result of `which perl').
800
801PERL_PATH              = @PERL@
802
803#---------------------------------------------------------------------------
804# Configuration options related to the dot tool   
805#---------------------------------------------------------------------------
806
807# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
808# generate a inheritance diagram (in Html, RTF and LaTeX) for classes with base or
809# super classes. Setting the tag to NO turns the diagrams off. Note that this
810# option is superceded by the HAVE_DOT option below. This is only a fallback. It is
811# recommended to install and use dot, since it yield more powerful graphs.
812
813CLASS_DIAGRAMS         = YES
814
815# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
816# available from the path. This tool is part of Graphviz, a graph visualization
817# toolkit from AT&T and Lucent Bell Labs. The other options in this section
818# have no effect if this option is set to NO (the default)
819
820HAVE_DOT               = NO
821
822# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
823# will generate a graph for each documented class showing the direct and
824# indirect inheritance relations. Setting this tag to YES will force the
825# the CLASS_DIAGRAMS tag to NO.
826
827CLASS_GRAPH            = YES
828
829# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
830# will generate a graph for each documented class showing the direct and
831# indirect implementation dependencies (inheritance, containment, and
832# class references variables) of the class with other documented classes.
833
834COLLABORATION_GRAPH    = YES
835
836# If set to YES, the inheritance and collaboration graphs will show the
837# relations between templates and their instances.
838
839TEMPLATE_RELATIONS     = YES
840
841# If set to YES, the inheritance and collaboration graphs will hide
842# inheritance and usage relations if the target is undocumented
843# or is not a class.
844
845HIDE_UNDOC_RELATIONS   = YES
846
847# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
848# tags are set to YES then doxygen will generate a graph for each documented
849# file showing the direct and indirect include dependencies of the file with
850# other documented files.
851
852INCLUDE_GRAPH          = YES
853
854# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
855# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
856# documented header file showing the documented files that directly or
857# indirectly include this file.
858
859INCLUDED_BY_GRAPH      = YES
860
861# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
862# will graphical hierarchy of all classes instead of a textual one.
863
864GRAPHICAL_HIERARCHY    = YES
865
866# The tag DOT_PATH can be used to specify the path where the dot tool can be
867# found. If left blank, it is assumed the dot tool can be found on the path.
868
869DOT_PATH               =
870
871# The DOTFILE_DIRS tag can be used to specify one or more directories that
872# contain dot files that are included in the documentation (see the
873# \dotfile command).
874
875DOTFILE_DIRS           =
876
877# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
878# generate a legend page explaining the meaning of the various boxes and
879# arrows in the dot generated graphs.
880
881GENERATE_LEGEND        = YES
882
883# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
884# remove the intermedate dot files that are used to generate
885# the various graphs.
886
887DOT_CLEANUP            = YES
888
889#---------------------------------------------------------------------------
890# Configuration::addtions related to the search engine   
891#---------------------------------------------------------------------------
892
893# The SEARCHENGINE tag specifies whether or not a search engine should be
894# used. If set to NO the values of all tags below this one will be ignored.
895
896SEARCHENGINE           = NO
897
898# The CGI_NAME tag should be the name of the CGI script that
899# starts the search engine (doxysearch) with the correct parameters.
900# A script with this name will be generated by doxygen.
901
902#CGI_NAME               =
903
904# The CGI_URL tag should be the absolute URL to the directory where the
905# cgi binaries are located. See the documentation of your http daemon for
906# details.
907
908#CGI_URL                =
909
910# The DOC_URL tag should be the absolute URL to the directory where the
911# documentation is located. If left blank the absolute path to the
912# documentation, with file:// prepended to it, will be used.
913
914#DOC_URL                =
915
916# The DOC_ABSPATH tag should be the absolute path to the directory where the
917# documentation is located. If left blank the directory on the local machine
918# will be used.
919
920#DOC_ABSPATH            =
921
922# The BIN_ABSPATH tag must point to the directory where the doxysearch binary
923# is installed.
924
925#BIN_ABSPATH            =
926
927# The EXT_DOC_PATHS tag can be used to specify one or more paths to
928# documentation generated for other projects. This allows doxysearch to search
929# the documentation for these projects as well.
930
931#EXT_DOC_PATHS          =
Note: See TracBrowser for help on using the repository browser.